Find Models
-
0001_berlin_schoeneweide | 0001_ber-001
Version 1 created on 1/07/2021
0001_berlin_schoeneweide_2001.ifc (13323 kB)
Urban model in LOD 2 (SIG) based on pixelized map from the Senate Department for Urban Development, Berlin and photographs. Primitive digital model originally produced with Archicad version 6 and published in IFC 2 with version 8 (2002). Project for M.Arch by research at RMIT.
-
1 | 1-001
Version 1 created on 11/01/2021
NG3-009.ifc (11004 kB)
-
111 | 111-001
Version 1 created on 2/10/2019
Mechanical Piping.ifc (42604 kB) | 1 other version
-
2102_anarchtheque | 2102_ana-001
Version 1 created on 16/03/2021
2102_cira.ifc (10371 kB)
Contribution to an_architecture competition for the extension of an international research centre in Switzerland. Model ICF4.0.2.0 in LOD 200. Note: only the new entities for the transformation of the existing building have as property « new » or « existing ». Entities with the property « demolish » have not been published in this IFC. Entities for the new building have as property « existing ».
-
3D_Model_PNO | 3D_Model-001
Version 1 created on 5/02/2020
Model_PNO.ifc (158 kB)
-
55 | 55-001
Version 1 created on 18/03/2020
SD-M-1637-L55-IFC 200318.IFC (59007 kB)
-
Al-Salam Hospital Project | Al-Salam-001
Version 1 created on 8/11/2021
ARA_ASH_S3B_ARCHITECTURE_wall.ifc (92008 kB)
Al-Salam Hospital Project
-
APHS | APHS-001
Version 1 created on 6/03/2019
17043 - APHS 5-3-19.ifc (66764 kB)
-
ARCHI | ARCHI-001
Version 1 created on 26/11/2020
GEN_DOE_GSE_ARC_Exploit.ifc (109974 kB)
-
Architecture_Vahid | Architec-001
Version 1 created on 19/02/2021
Architecture.ifc (110671 kB)
-
Azuma house | Azuma ho-001
Version 1 created on 26/11/2019
AZUMA9.ifc (10246 kB)
Famous Tadao Ando's house built in 1976.
-
BLIS: 01_IFCR2_Geo_Beams_1 | BLIS: 01-001
Version 1 created on 22/05/2001
01_IFCR2_Geo_Beams_1.ifc (36 kB) | 1 analysis
BLIS project certification files. Geometry test. Rectangular beams, Not slanted, Different rotations, Different elevations
-
BLIS: 02_IFCR2_Geo_Columns_1 | BLIS: 02-001
Version 1 created on 22/05/2001
02_IFCR2_Geo_Columns_1.ifc (30 kB) | 1 analysis
BLIS project certification file. Geometry test. Rectangular columns, Circular columns, Not slanted, Different rotations
-
BLIS: 03_IFCR2_Geo_Doors_1 | BLIS: 03-001
Version 1 created on 22/05/2001
03_IFCR2_Geo_Doors_1.ifc (144 kB) | 1 analysis
BLIS project certification files. Geometry test. Single swing and double swing doors, All different swing direction and hinge position cases, Inserted into straight rotated walls, No Brep geometry for doors
-
BLIS: 04_IFCR2_Geo_FloorSlabs_1 | BLIS: 04-001
Version 1 created on 22/05/2001
04_IFCR2_Geo_FloorSlabs_1.ifc (11 kB) | 1 analysis
BLIS project certification files. Geometry test. Slabs with straight boundaries, Not clipped, No openings, Different coordinate directions, Different shapes
-
BLIS: 05_IFCR2_Geo_FloorSlabs_2 | BLIS: 05-001
Version 1 created on 22/05/2001
05_IFCR2_Geo_FloorSlabs_2.ifc (31 kB) | 1 analysis
BLIS project certification files. Geometry test. Curved slabs, Not clipped, No openings, All different 'bulge' situations covered
-
BLIS: 06_IFCR2_Geo_Openings_1 | BLIS: 06-001
Version 1 created on 22/05/2001
06_IFCR2_Geo_Openings_1.ifc (19 kB) | 1 analysis
BLIS project certification files. Geometry test. Inserted into straight rotated walls, Different opening heights
-
BLIS: 07_IFCR2_Geo_Openings_2 | BLIS: 07-001
Version 1 created on 22/05/2001
07_IFCR2_Geo_Openings_2.ifc (10 kB) | 1 analysis
BLIS project certification file. Geometry test. Inserted into straight wall, Openings partly outside the wall, Overlapping openings
-
BLIS: 08_IFCR2_Geo_Openings_3 | BLIS: 08-001
Version 1 created on 22/05/2001
08_IFCR2_Geo_Openings_3.ifc (12 kB) | 1 analysis
BLIS project certification file. Geometry test. Openings in slabs, Rectangular, Triangle, Circular
-
BLIS: 09_IFCR2_Geo_RoofSlabs_1 | BLIS: 09-001
Version 1 created on 22/05/2001
09_IFCR2_Geo_RoofSlabs_1.ifc (47 kB) | 1 analysis
BLIS project certification file. Geometry test. Slabs with straight boundaries, Geometry, Extruded solid, not clipped, Brep, No openings, Different shapes and orientations
-
BLIS: 10_IFCR2_Geo_Spaces_1 | BLIS: 10-001
Version 1 created on 22/05/2001
10_IFCR2_Geo_Spaces_1.ifc (23 kB) | 1 analysis
BLIS project certification file. Geometry test. Spaces with straight boundaries, Not clipped, Different coordinate directions, Different shapes
-
BLIS: 11_IFCR2_Geo_Spaces_2 | BLIS: 11-001
Version 1 created on 22/05/2001
11_IFCR2_Geo_Spaces_2.ifc (53 kB) | 1 analysis
BLIS project certification file. Geometry test. Curved spaces, Not clipped, All different 'bulge' situations covered
-
BLIS: 12_IFCR2_Geo_Walls_1 | BLIS: 12-001
Version 1 created on 22/05/2001
12_IFCR2_Geo_Walls_1.ifc (8 kB) | 1 analysis
BLIS project certification file. Geometry test. Straight walls, Not clipped, Walls reference line offset, Outside wall below, Edge below, Center, Edge above, Outside wall above
-
BLIS: 13_IFCR2_Geo_Walls_2 | BLIS: 13-001
Version 1 created on 22/05/2001
13_IFCR2_Geo_Walls_2.ifc (22 kB) | 1 analysis
BLIS project certification file. Geometry test. Straight walls, Not clipped, Wall placement and orientation, All walls centerline
-
BLIS: 14_IFCR2_Geo_Walls_3 | BLIS: 14-001
Version 1 created on 22/05/2001
14_IFCR2_Geo_Walls_3.ifc (22 kB) | 1 analysis
BLIS project certification file. Geometry test. Straight walls, Not clipped, Wall placement and orientation, Random wall referenceline